Aye, if I have to use BGP to do this, I'll just give up now
and save myself the agony.
I am reading the Advanced Routing How-to, and ran into a
problem in the first example that he gives, and I am not
quite sure on where to go. Here are the example commands and
outputs he gives:
ahu@home ahu]$ ip link list
1: lo: <LOOPBACK,UP> mtu 3924 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy: <BROADCAST,NOARP> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1400 qdisc
pfifo_fast qlen 100
link/ether 48:54:e8:2a:47:16 brd ff:ff:ff:ff:ff:ff
4: eth1: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc
pfifo_fast qlen 100
link/ether 00:e0:4c:39:24:78 brd ff:ff:ff:ff:ff:ff
3764: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP> mtu 1492 qdisc
pfifo_fast qlen 10
link/ppp
But here is what I get:
[root@ns1 /root]# ip link list
Cannot open netlink socket: Address family not supported by
protocol
I have the latest iproute package installed, running RH71 on
a 2.4.5 kernel... any ideas? Thanks,
Doug
On Sat, 23 Jun 2001 18:47:53 -0400 (EDT)
R P Herrold <herrold@owlriver.com> wrote:
> On Sat, 23 Jun 2001, billt wrote:
>
> > > I have a DSL account, and will soon have a RR account
> (free
> > > setup, one month free, I HAD to try this :) So, I am
> hoping
> > > to use my RH 7.1 box and 2 NICs to combine these.
> Anybody
> > > have any pointers on this, or done it before? Thanks,
> >
> > I have never tried to combine two uplinks before, but i
> have read about
> > people doing it successfully (and not so successfully)
> on the Linux
> > Advanced routing list.
>
> The gated package will talk BGP [in part developed at
> OAR.NET
> in Columbus] -- but it is pretty unlikely that your ISP's
> will
> peer this with you -- I border filter such requests from
> my
> users at the ISP's I admin.
>
> It can cause SERIOUS router flap, and misrouting if it
> leaks.
>
> -- Russ
>
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 19:46:11 EDT