> > Sorry to bother you people about the same old problems but I am not
> > following this.
Well if this was working and if I had any additional ideas I would not be
posting this. Basically the problem is that when I go to Xinted by a browser
at: http://192.168.1.1:901 my browser say that there is no route to this
address. Different browsers express this differently but all with the same
meaning.
Whit follows first is the xited configuration file. May be there is something
wrong is so I don't see it.
Following this is the resolve.conf file and the host.allow file. The host
deny file is empty.
> >
> > If I understand this correctly xinted should be accessible by a browser at
> > http://192.168.1.1:901 which is the address of my server at port 901.
> >
> > All I am able to get is "No route to host."
> > My etc/xinted.d/swat file
> >
> > # default: off
> > # description: SWAT is the Samba Web Admin Tool. Use swat \
> > # to configure your Samba server. To use SWAT, \
> > # connect to port 901 with your favorite web browser.
> > service swat
> > {
> > port = 901
> > socket_type = stream
The following was added:
protocol = tcp
> > wait = no
> > only_from = 127.0.0.1
Changed to:
> only_from = 192.9.168.10 192.9.168.11
> > user = root
> > server = /usr/sbin/swat
> > log_on_failure += USERID
> > disable = no
> > }
> >
-----------------------
etc/hosts.allow file
#
# hosts.allow This file describes the names of the hosts which are
# allowed to use the local INET services, as decided
# by the '/usr/sbin/tcpd' server.
#
ALL: ALL
-----------------------
etc/hosts.allow file
search localdomain
nameserver 127.0.0.1
nameserver 192.168.1.1
nameserver 192.168.1.2
-----------------------
If anyone has any suggestions I would appreciate it.
Please no RTFM as I am reading the manual.
Thanks
Frank
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 18:43:09 EDT