I don't know about the announce line but taking out the ; can be tried, maybe
when I try to bring up lserver on my w2k wksta it does not respond on the first
click query, but it is only a 233mhz machine. I am using the version of samba
that comes with redhat 7.1, using redhat 7.1 . I also got samba running after I
bought the teach yourself samba in xx days book. I have not been able to get the
printer share from wnt4 to work that I have had working in the redhat 6.x
series, but its not a priority because I can read,write and print files from my
w2k wksta. I would be willing to help physically at your site if not too far
from homosassa, fl. , where are you located?
bob
Mike Manchester wrote:
> Bob;
> Thanks for the info. But after removeing the line I still can't get my
> windows clients to talk to my Samba machine. Here's the changes I made to
> you smb.conf that don't work on my machine. Maybe you can see something I'm
> missing.
>
> # This is the main Samba configuration file. You should read the
> # smb.conf(5) manual page in order to understand the options listed
> # here. Samba has a huge number of configurable options (perhaps too
> # many!) most of which are not shown in this example
> #
> # Any line which starts with a ; (semi-colon) or a # (hash)
> # is a comment and is ignored. In this example we will use a #
> # for commentry and a ; for parts of the config file that you
> # may wish to enable
> #
> # NOTE: Whenever you modify this file you should run the command "testparm"
> # to check that you have not many any basic syntactic errors.
> #
> #======================= Global Settings
> =====================================
> [global]
>
> # workgroup = NT-Domain-Name or Workgroup-Name
> workgroup = mygroup
>
> # server string is the equivalent of the NT Description field
> server string = Samba Server
>
> # This option is important for security. It allows you to restrict
> # connections to machines which are on your local network. The
> # following example restricts access to two C class networks and
> # the "loopback" interface. For more examples of the syntax see
> # the smb.conf man page
> hosts allow = 192.168.0. 127.
>
> # if you want to automatically load your printer list rather
> # than setting them up individually then you'll need this
> printcap name = /etc/printcap
> load printers = yes
>
> # It should not be necessary to spell out the print system type unless
> # yours is non-standard. Currently supported print systems include:
> # bsd, sysv, plp, lprng, aix, hpux, qnx
> printing = lprng
>
> # Uncomment this if you want a guest account, you must add this to
> /etc/passwd
> # otherwise the user "nobody" is used
> ; guest account = pcguest
>
> # this tells Samba to use a separate log file for each machine
> # that connects
> log file = /var/log/samba/%m.log
>
> # Put a capping on the size of the log files (in Kb).
> max log size = 0
>
> # Security mode. Most people will want user level security. See
> # security_level.txt for details.
> security = user
> # Use password server option only with security = server or
> # security = domain
> ; password server = <NT-Server-Name>
>
> # Password Level allows matching of _n_ characters of the password for
> # all combinations of upper and lower case.
> ; password level = 8
> ; username level = 8
>
> # You may wish to use password encryption. Please read
> # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
> # Do not enable this option unless you have read those documents
> encrypt passwords = yes
> smb passwd file = /etc/samba/smbpasswd
>
> # The following are needed to allow password changing from Windows to
> # update the Linux sytsem password also.
> # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
> # NOTE2: You do NOT need these to allow workstations to change only
> # the encrypted SMB passwords. They allow the Unix password
> # to be kept in sync with the SMB password.
> ; unix password sync = Yes
> ; passwd program = /usr/bin/passwd %u
> ; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n
>
> # Unix users can map to different SMB User names
> ; username map = /etc/samba/smbusers
>
> # Using the following line enables you to customise your configuration
> # on a per machine basis. The %m gets replaced with the netbios name
> # of the machine that is connecting
> ; include = /etc/samba/smb.conf.%m
>
> # Most people will find that this option gives better performance.
> # See speed.txt and the manual pages for details
> socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
>
> # Configure Samba to use multiple interfaces
> # If you have multiple network interfaces then you must list them
> # here. See the man page for details.
> ; interfaces = 192.168.12.2/24 192.168.13.2/24
>
> # Configure remote browse list synchronisation here
> # request announcement to, or browse list sync from:
> # a specific host or from / to a whole subnet (see below)
> ; remote browse sync = 192.168.3.25 192.168.5.255
> # Cause this host to announce itself to local subnets here
> ; remote announce = 192.168.1.255 192.168.2.44
>
> # Browser Control Options:
> # set local master to no if you don't want Samba to become a master
> # browser on your network. Otherwise the normal election rules apply
> ; local master = no
>
> # OS Level determines the precedence of this server in master browser
> # elections. The default value should be reasonable
> ; os level = 33
>
> # Domain Master specifies Samba to be the Domain Master Browser. This
> # allows Samba to collate browse lists between subnets. Don't use this
> # if you already have a Windows NT domain controller doing this job
> ; domain master = yes
>
> # Preferred Master causes Samba to force a local browser election on startup
>
> # and gives it a slightly higher chance of winning the election
> ; preferred master = yes
>
> # Enable this if you want Samba to be a domain logon server for
> # Windows95 workstations.
> ; domain logons = yes
>
> # if you enable domain logons then you may want a per-machine or
> # per user logon script
> # run a specific logon batch file per workstation (machine)
> ; logon script = %m.bat
> # run a specific logon batch file per username
> ; logon script = %U.bat
>
> # All NetBIOS names must be resolved to IP Addresses
> # 'Name Resolve Order' allows the named resolution mechanism to be specified
>
> # the default order is "host lmhosts wins bcast". "host" means use the unix
> # system gethostbyname() function call that will use either /etc/hosts OR
> # DNS or NIS depending on the settings of /etc/host.config,
> /etc/nsswitch.conf
> # and the /etc/resolv.conf file. "host" therefore is system configuration
> # dependant. This parameter is most often of use to prevent DNS lookups
> # in order to resolve NetBIOS names to IP Addresses. Use with care!
> # The example below excludes use of name resolution for machines that are
> NOT
> # on the local network segment
> # - OR - are not deliberately to be known via lmhosts or via WINS.
> ; name resolve order = wins lmhosts bcast
>
> # Windows Internet Name Serving Support Section:
> # WINS Support - Tells the NMBD component of Samba to enable it's WINS
> server
> ; wins support = yes
>
> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
> ; wins server = 192.168.1.100
>
> # WINS Proxy - Tells Samba to answer name resolution queries on
> # behalf of a non WINS capable client, for this to work there must be
> # at least one WINS Server on the network. The default is NO.
> ; wins proxy = yes
>
> # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
> # via DNS nslookups. The built-in default for versions 1.9.17 is yes,
> # this has been changed in version 1.9.18 to no.
> dns proxy = no
>
> # Case Preservation can be handy - system default is _no_
> # NOTE: These can be set on a per share basis
> ; preserve case = no
> ; short preserve case = no
> # Default case is normally upper case for all DOS files
> ; default case = lower
> # Be very careful with case sensitivity - it can break things!
> ; case sensitive = no
>
> #============================ Share Definitions
> =============================
> [homes]
> comment = Home Directories
> browseable = no
> writable = yes
>
> # Un-comment the following and create the netlogon directory for Domain
> Logons
> ; [netlogon]
> ; comment = Network Logon Service
> ; path = /home/netlogon
> ; guest ok = yes
> ; writable = no
> ; share modes = no
>
> # Un-comment the following to provide a specific roving profile share
> # the default is to use the user's home directory
> ;[Profiles]
> ; path = /home/profiles
> ; browseable = no
> ; guest ok = yes
>
> # NOTE: If you have a BSD-style print system there is no need to
> # specifically define each individual printer
> [printers]
> comment = All Printers
> path = /var/spool/samba
> browseable = no
> # Set public = yes to allow user 'guest account' to print
> guest ok = no
> printable = yes
>
> # This one is useful for people to share files
> ;[tmp]
> ; comment = Temporary file space
> ; path = /tmp
> ; read only = no
> ; public = yes
>
> # A publicly accessible directory, but read only, except for people in
> # the "staff" group
> [root]
> ; comment = Public Stuff
> ; path = /
> ; public = yes
> ; writable = yes
> ; printable = no
> ; write list = administrator
>
> # Other examples.
> #
> # A private printer, usable only by fred. Spool data will be placed in
> fred's
> # home directory. Note that fred must have write access to the spool
> directory,
> # wherever it is.
> ;[fredsprn]
> ; comment = Fred's Printer
> ; valid users = fred
> ; path = /homes/fred
> ; printer = freds_printer
> ; public = no
> ; printable = yes
>
> # A private directory, usable only by fred. Note that fred requires write
> # access to the directory.
> ;[fredsdir]
> ; comment = Fred's Service
> ; path = /usr/somewhere/private
> ; valid users = fred
> ; public = no
> ; writable = yes
> ; printable = no
>
> # a service which has a different directory for each machine that connects
> # this allows you to tailor configurations to incoming machines. You could
> # also use the %u option to tailor it by user name.
> # The %m gets replaced with the machine name that is connecting.
> ;[pchome]
> ; comment = PC Directories
> ; path = /usr/pc/%m
> ; public = no
> ; writable = yes
>
> # A publicly accessible directory, read/write to all users. Note that all
> files
> # created in the directory by users will be owned by the default user, so
> # any user with access can delete any other user's files. Obviously this
> # directory must be writable by the default user. Another user could of
> course
> # be specified, in which case all files would be owned by that user instead.
>
> ;[public]
> ; path = /usr/somewhere/else/public
> ; public = yes
> ; only guest = yes
> ; writable = yes
> ; printable = no
>
> # The following two entries demonstrate how to share a directory so that two
>
> # users can place files there that will be owned by the specific users. In
> this
> # setup, the directory should be writable by both users and should have the
> # sticky bit set on it to prevent abuse. Obviously this could be extended to
>
> # as many users as required.
> [myshare]
> comment = Document shares
> path = /data/Documents
> valid users = mchester
> public = no
> writable = yes
> printable = no
> create mask = 0765
>
> Robert Krencis wrote:
>
> > Hi mike,
> > That line was part of the line above it . My netscape truncated it and
> > continued on the next line.
> > the line should read as following:
> > line start ; passwd chat = *New*UNIX*password* %n\n
> > *ReType*new*UNIX*password* %n\n line continuation
> > *passwd:*all*authentication*tokens*updated*successfully*
> > the line above is part of line start after putting a space after %n\n on
> > line start and should be commented out .
> > my browser wont let me fmt it in one line.
> > just like the =======global line that was auto wrapped.
> > bob
> >
> > Mikes work account wrote:
> >
> > > Comment it out or delete it and try again, I have never seen a Samba
> > > configuration line like it.
> > >
> > > Michael C. Rock
> > >
> > > > -----Original Message-----
> > > > From: slug@lists.nks.net [mailto:slug@lists.nks.net]On Behalf Of Mike
> > > > Manchester
> > > > Sent: Friday, August 17, 2001 6:57 AM
> > > > To: slug@nks.net
> > > > Subject: Re: [SLUG] another samba question
> > > >
> > > >
> > > > Robert;
> > > > Thanks for posting you smb.conf. I'm going to give it a shot but
> > > > first I need
> > > > to ask about the following line from you post. Seems testparm
> > > > doesn't like it
> > > > and flags an error. Is there something wrong with this line?
> > > >
> > > > Thanks
> > > > Mike M.
> > > >
> > > > Robert Krencis wrote:
> > > >
> > > > > *passwd:*all*authentication*tokens*updated*successfully*
> > > >
> > > >
> > > > _________________________________________________________
> > > > Do You Yahoo!?
> > > > Get your free @yahoo.com address at http://mail.yahoo.com
> > > >
> > > >
> > > >
> > > >
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 19:43:10 EDT