Russ;
I tried it again from run level 3 and here's what happened.
This is some of the messages that were on the screen just before it
locked up my system.
starting new track at sector:0
track 01: 12 of 31 MB written (fifo 100%) hdb: timeout waiting for data
ide_dmaproc: chipset supported ide_data_timeout func only: 14
hdb: status error: status=0x58 {driveready seekcomplete datareq user}
hdb: drive not ready for command
at this point the system is locked up tight as a drum and the green
light on the cd rom is flashing. The write lite is off.
I'm attaching the dmesg file you asked for also.
Thanks so much
Mike M
R P Herrold wrote:
> On Thu, 20 Sep 2001, Mike Manchester wrote:
>
> > I thought this was going to do it, I was able to burn up
> > to 30% before my pc locked up and I had to power off. This
> > was after removing the magicdev. So I thought I'd try the
> > autofs, so after un-installing and rebooting I tried to
> > burn another cd and I only got to 3% before it locked up,
> > requiring a reboot. So I guess I'm back to Windows until I
> > can get my cdroms burnt, or until someone wakes up and
> > fixes the kernel. :(
>
> Why did you have to power off? Were you using cdrecord at the
> command line? Why could you not change to another console and
> examine the hung process? -- Please try your efforts in
> Runlevel 3 -- not is an X console --- It may be that
> screensaver, or other background X window manager is really
> the issue.
>
> Additionally, if it DOES again hang, please run:
>
> dmesg > /tmp/locked
>
> and send me a copy 0f /tmp/locked off list.
>
> -- Russ
Linux version 2.4.3-12 (root@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-85)) #1 Fri Jun 8 15:05:56 EDT 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Kernel command line: auto BOOT_IMAGE=linux ro root=345 BOOT_FILE=/boot/vmlinuz-2.4.3-12 hdd=ide-scsi hdc=ide-scsi
ide_setup: hdd=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 267.277 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 532.48 BogoMIPS
Memory: 125132k/131072k available (1235k kernel code, 4528k reserved, 94k data, 244k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
VFS: Diskquotas version dquot_6.5.0 initialized
CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000
CPU: After generic, caps: 0183fbff 00000000 00000000 00000000
CPU: Common caps: 0183fbff 00000000 00000000 00000000
CPU: Intel Celeron (Covington) stepping 00
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb200, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: Calling quirk for 01:00
isapnp: SB audio device quirk - increasing port range
isapnp: Card 'Creative ViBRA16C PnP'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
Starting kswapd v1.8
pty: 2048 Unix98 ptys configured
block: queued sectors max/low 83064kB/27688kB, 256 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: Maxtor 90576D4, ATA DISK drive
hdb: Maxtor 53073H4, ATA DISK drive
hdc: MATSHITA CR-587, ATAPI CD/DVD-ROM drive
hdd: HP CD-Writer+ 7200, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 11255328 sectors (5763 MB) w/256KiB Cache, CHS=700/255/63, UDMA(33)
hdb: 60030432 sectors (30736 MB) w/2048KiB Cache, CHS=3736/255/63, UDMA(33)
Partition check:
hda: [EZD] [remap 0->1] [700/255/63] hda1 hda3 < hda5 hda6 >
hdb: [EZD] [remap 0->1] [3736/255/63] hdb1 < hdb5 hdb6 hdb7 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 353k freed
Serial driver version 5.05a (2001-03-20) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md.c: sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
PCI: Assigned IRQ 9 for device 00:0b.0
(scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 0/11/0
(scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Downloading sequencer code... 415 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0
<Adaptec AHA-294X SCSI host adapter>
Vendor: iomega Model: jaz 1GB Rev: H.71
Type: Direct-Access ANSI SCSI revision: 02
Vendor: UMAX Model: Astra 610S Rev: V1.3
Type: Scanner ANSI SCSI revision: 02
Vendor: HP Model: HP35470A Rev: 1009
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: IOMEGA Model: ZIP 100 Rev: N*32
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi removable disk sdb at scsi0, channel 0, id 6, lun 0
(scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15.
SCSI device sda: 2091050 512-byte hdwr sectors (1071 MB)
sda: Write Protect is off
sda: sda4
SCSI device sdb: 196608 512-byte hdwr sectors (101 MB)
sdb: Write Protect is off
sdb: sdb4
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=3
Trying to unmount old root ... okay
Freeing unused kernel memory: 244k freed
Adding Swap: 297160k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.251 $ time 15:24:59 Jun 8 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 15 for device 00:07.2
IRQ routing conflict in pirq table for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: Creative ViBRA16C PnP detected
sb: ISAPnP reports 'Creative ViBRA16C PnP' at i/o 0x220, irq 5, dma 1, 5
SB 4.13 detected OK (220)
sb: 1 Soundblaster PnP card(s) found.
st: bufsize 32768, wrt 30720, max init. buffers 4, s/g segs 16.
Attached scsi tape st0 at scsi0, channel 0, id 3, lun 0
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: MATSHITA Model: CD-ROM CR-587 Rev: 7S13
Type: CD-ROM ANSI SCSI revision: 02
Vendor: HP Model: CD-Writer+ 7200 Rev: 3.01
Type: CD-ROM ANSI SCSI revision: 02
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
Winbond chip at EFER=0x370 key=0x87 devid=97 devrev=73 oldid=ff
Winbond chip type 83977TF / SMSC 97w33x/97w34x
Winbond LPT Config: cr_30=01 60,61=0378 70=07 74=03, f0=07
Winbond LPT Config: active=yes, io=0x0378 irq=7, dma=3
Winbond LPT Config: irqtype=pulsed low, high-Z, ECP fifo threshold=0
Winbond LPT Config: Port mode=ECP and EPP-1.7
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 16
0x378: readIntrThreshold is 16
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x48
0x378: ECP settings irq=7 dma=<none or set by other means>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,EPP,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(18)
parport0: assign_addrs: aa5500ff(18)
parport0: cpp_daisy: aa5500ff(18)
parport0: assign_addrs: aa5500ff(18)
ip_conntrack (1024 buckets, 8192 max)
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Assigned IRQ 9 for device 00:0d.0
eth0: RealTek RTL-8029 found at 0xe800, IRQ 9, 00:80:C8:FE:4F:CA.
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
Winbond chip at EFER=0x370 key=0x87 devid=97 devrev=73 oldid=ff
Winbond chip type 83977TF / SMSC 97w33x/97w34x
Winbond LPT Config: cr_30=01 60,61=0378 70=07 74=03, f0=07
Winbond LPT Config: active=yes, io=0x0378 irq=7, dma=3
Winbond LPT Config: irqtype=pulsed low, high-Z, ECP fifo threshold=0
Winbond LPT Config: Port mode=ECP and EPP-1.7
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 16
0x378: readIntrThreshold is 16
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x48
0x378: ECP settings irq=7 dma=<none or set by other means>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,EPP,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(98)
parport0: assign_addrs: aa5500ff(98)
parport0: cpp_daisy: aa5500ff(18)
parport0: assign_addrs: aa5500ff(18)
lp0: using parport0 (polling).
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 19:55:58 EDT