The shop vac, baggie trick works well. I used for nearly 600' and used
fishing line because it was lighter that string.
-----Original Message-----
From: slug@nks.net [mailto:slug@nks.net]On Behalf Of wchast@utilpart.com
Sent: Wednesday, July 21, 2004 7:08 AM
To: slug@nks.net
Subject: RE: [SLUG] Using old ethernet wiring?
Eben King wrote:
> On Sat, 17 Jul 2004 wchast@utilpart.com wrote:
>
>> Paul M Foster wrote:
>>> On Fri, Jul 16, 2004 at 01:43:14PM -0400, Doug Koobs wrote:
>>>
>>> <snip>
>>>
>>>> In my electrician days, I usually used two methods, depending on
>>>> the situation. You can use a ShopVac on one end, and a plastic
>>>> baggie (called a "mouse") tied to a pull string on the other end.
>>>> Then just suck the mouse and pull string through. This works best
>>>> with PVC conduit, since it is generally more airtight than the
>>>> metal varieties.
>>
>> I used this same setup to pull 300 feet of cord through PVC piping
>> between two houses then pulled cat5 through it. Needed the lub though
>> as it got a bit hard about 3/4 of the way through. But at least I
>> have the two buildings linked.
>
> Shouldn't put something conductive between buildings. They might have
> different ground potential (it works, thus disproving that), or
> lightning could strike nearby, frying one or both ends and attached
> equipment. You should use fiber or radio.
I want to replace it with fibre but needed to get it going, did not want
to deal with the hassle of RF on the street end. So pulled some cat5.
I have one end of a fibre system, just need to get the other box and then
I will pull fibre through it and be done.
Chuck Hast
-------------------------------------------------------------------------
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."
*****************************************************************
This e-mail and any files transmitted with it are confidential and are
intended solely for the use of the individual or entity to whom it is
addressed. If you have received this transmission in error, please notify
the sender immediately and destroy any hard copies you may have printed and
remove all copies of the e-mail from your hard drive. Opinions, conclusions
and other information in this message that do not relate to the official
business of Utility Partners, Inc shall be understood as neither given nor
endorsed by it.
Visit us on the web at http://www.utilpart.com
*****************************************************************
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 13:20:37 EDT