Brice Burgess wrote:
> In an effort to keep things simple, here's an overview of what I
> envision doing:
>
> ----
> I'm planning to build an aluminum chasis to hold 4 3.5 in IDE 120GB hard
> drives. The drives will be connected to 2 IEEE 1394b bridgeboards, and
> then to a 1394b controller card inside a Linux box. I will then use
> Linux Software RAID5 to create a single 360GB disk out of the 4 drives.
> ----
>
> With that said.. I know there's a lot of potential problems. Can mdadm
> handle drives over a 1394b link? Do the drives need to be connected to
> seperate host adapters? etc. etc.
>
> Has anyone dealt with this situation, or have better ideas about
> building a cheap DIY external RAID system under Linux?
Depending on what that would end up costing you, it might make more
sense to simply purchase one of these:
http://www.lacie.com/products/product.htm?id=10118
-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS). Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 17:45:15 EDT