>> In the ultimate, worse case scenario, you could always jam in and mount
a separate hdd, use an external drive or an already extant partition and
follow the advice already provided by fellow Slugger, Matt Moen:
That doesn't do what I want.
Here's one example: This is a server application, lightly loaded. It needs
to stay up all the time, since it feeds CNC machine tools. We're talking
CNC machine tools as big as a semi-truck. The load is very light, as the 20
machine tools are being fed via RS-232 ports at 9600 baud. I can tell
everyone to shut down the machines to take a server outage, but cannot stop
in the middle of a run. If the server crashes, a bunch of machine tools
stop running, and that's a really bad thing.
I used a pair of hard disks, attached to a 3Ware RAID card, mirrored. I
installed the OS (SUSE) on the mirrored drives. After it was up, I tested
it by removing the power cable from one drive. The system stayed up.
It was my understanding that if I used software RAID, I could _not_ mirror
the swap partition (at least I have not figured out how). Without a
mirrored swap partition, loss of one drive would crash the OS, since it
would be the equal of a RAM error. I could restart the server, but the
reboot would have mucked up the CNC machine tools.
So I don't care what it takes _after_ the crash, I must not allow it to
crash at all. Thus my decision to use hardware RAID. Yes, it has twin
power supplies, twin UPS, etc...
Ken Elliott
=====================
-----Original Message-----
From: slug@nks.net [mailto:slug@nks.net] On Behalf Of Logan Tygart
Sent: Sunday, July 16, 2006 2:52 PM
To: SLUG
Subject: Re: [SLUG] Is RAID worth doing?
On Sun, 2006-07-16 at 13:36 -0400, Jason Boxman wrote:
> On Sunday 16 July 2006 12:01, Ken Elliott wrote:
> <snip>
<snip>
> > My goal is not to crash the server, in the event of a HDD failure.
> > I don't mind a scheduled shutdown to replace a drive and rebuild the
> > system. How do you avoid crashing the system if your swap partition
fails?
>
> I don't know that you can. Fortunately you can mirror swap.
In the ultimate, worse case scenario, you could always jam in and mount a
separate hdd, use an external drive or an already extant partition and
follow the advice already provided by fellow Slugger, Matt Moen:
http://enterprise.linux.com/enterprise/05/03/02/2250257.shtml?tid=129&tid=42
The Logan
-- We'll make great pets. -- Carl Sagan Registered Linux User: 277727----------------------------------------------------------------------- This list is provided as an unmoderated internet service by Networked Knowledge Systems (NKS). Views and opinions expressed in messages posted are those of the author and do not necessarily reflect the official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 14:41:44 EDT