As far of my knowledge of 486's goes there was never a 200mhz 486 ever made.
Intel went to a 120mhz 486, Amd went to a 133 586 which was a hybrid pentium
and 486 how ever it fit in a 486 socket , and Cyrix made a 133 mhz and 120,
and IBM Blue Lightning 133 mhz.
I have over clocked a Amd 5x86 133 to 166mhz but that was on one of the
fastest Chips and Technologies Mb, and once on a Shuttle Mother Board but it
ran extremly hot on that board. Would freeze up.
Now I am not sure how it could be a 486 200mhz ??
sx 25mhz, sx 33, sx2 50 sx2 66 In Dx 25, dx2 50, dx2 66, dx3 75 dx4 100 dx 4
120 Difference was that sx did not have a math co processor. and the DX did.
I also believe there was a 40mhz as well for the Intel but I could be wrong.
Cyrix had a 486 slc and dlc series as well as sx and dx slc's and dlc's were
based on a 386 pin out and even would work on some high end 386 boards.
Any way I am not saying that you are lying by any means but you really need to
check and look at the number of which model it is.
According to 2 hours of checking through hp,compaq website and google Compaq
only had a p1 200 a p1 200 mmx, and a pentium pro 200.
Check again when u get the number off the case then look up and see what it
tells you..
> This one has a 200Mhz processor.
>
> > -----Original Message-----
> > From: bpreece1@tampabay.rr.com [mailto:bpreece1@tampabay.rr.com]
> > Sent: Friday, July 05, 2002 09:16 PM
> > To: slug@nks.net
> > Subject: Re: [SLUG] Compaq Prosignia 486
> >
> >
> > 133MHz Is what they say is in the Proliant 1500 7.3 says
> > 200mhz minimum for
> > requirements!!!!
> > So that in it self could be half the problem.
> >
> >
> > -----Original Message-----
> > From: wchast@utilpart.com <wchast@utilpart.com>
> > To: slug@nks.net <slug@nks.net>
> > Date: Friday, July 05, 2002 7:40 PM
> > Subject: RE: [SLUG] Compaq Prosignia 486
> >
> > >It is a ProLiant 1500 with 192m of ram and 4 HD in it set up
> >
> > as a RAID
> >
> > >The memory is EDO, when I try to start up the install, it comes back
> > >saying that there is not enough memory. Funny thing is a installed
> > >7.3 on a 64m memory machine (a Compaq DeskPro) no problem.
> > >
> > >I do not see the 1500 in the list though, it is a old machine but
> > >we could sure use it for a file server, and when your company is
> > >trying to get out of Ch 11 you try to use anything you can.
> > >
> > >> -----Original Message-----
> > >> From: bpreece1@tampabay.rr.com [mailto:bpreece1@tampabay.rr.com]
> > >> Sent: Friday, July 05, 2002 06:57 PM
> > >> To: slug@nks.net
> > >> Subject: Re: [SLUG] Compaq Prosignia 486
> > >>
> > >>
> > >> I do believe though they have a download version available
> >
> > for a 486.
> >
> > >> As for the Prosigina there is only one listed on Redhats
> >
> > HCL hardware
> >
> > >> Compatiable List and yours is not the one.
> > >>
> > >> For the Proliant person which model and have you checked the
> > >> HCL list as
> > >> there is over 100 Proliant Models.
> > >>
> > >> http://hardware.redhat.com/hcl/genpage2.cgi?pagename=hcl&view=
> > >> certified&vend
> > >> or=2&class=8#list
> > >>
> > >> Good Luck
> > >>
> > >> -----Original Message-----
> > >> From: Gary Cook <gcook1@tampabay.rr.com>
> > >> To: slug@nks.net <slug@nks.net>
> > >> Date: Friday, July 05, 2002 5:55 PM
> > >> Subject: RE: [SLUG] Compaq Prosignia 486
> > >>
> > >> >Chuck Hast,
> > >> >
> > >> >No I have had no resolution to the problem.
> > >> >
> > >> >If you find out let me know.
> > >> >
> > >> >Gary
> > >> >
> > >> >-----Original Message-----
> > >> >From: slug@lists.nks.net [mailto:slug@lists.nks.net] On
> > >>
> > >> Behalf Of Chuck
> > >>
> > >> >Hast
> > >> >Sent: Monday, July 01, 2002 9:47 PM
> > >> >To: slug@nks.net
> > >> >Subject: Re: [SLUG] Compaq Prosignia 486
> > >> >
> > >> >On Monday 24 June 2002 00:12 L, you wrote:
> > >> >> I am having problems install Linux Redhat 7.2 on a
> >
> > Compaq Prosignia
> >
> > >> >486.
> > >> >
> > >> >> It says not enough memory. I also tried "linux mem=64M".
> > >> >>
> > >> >> If anyone can help please e-mail me. Gcook1@Tampabay.rr.com
> > >> >
> > >> >Did you ever get this resolved, I have a ProLiant with 164M of ram
> > >> >in it, I am trying to install RH 7.3 and get the same message.
> > >> >
> > >> >--
> > >> >Chuck Hast
> > >> >KP4DJT
> > >> >kp4djt@tampabay.rr.com
> > >> >To paraphrase my flight instructor;
> > >> >"the only dumb question is the one you DID NOT ask resulting in my
> > >> >going out and having to identify your bits and pieces in
> >
> > the midst of
> >
> > >> >torn and twisted metal."
> > >
> > >*****************************************************************
> > >This e-mail and any files transmitted with it are
> >
> > confidential and are
> >
> > >intended solely for the use of the individual or entity to whom it is
> > >addressed. If you have received this transmission in error,
> >
> > please notify
> >
> > >the sender immediately and destroy any hard copies you may
> >
> > have printed and
> >
> > >remove all copies of the e-mail from your hard drive.
> >
> > Opinions, conclusions
> >
> > >and other information in this message that do not relate to
> >
> > the official
> >
> > >business of Utility Partners, Inc shall be understood as
> >
> > neither given nor
> >
> > >endorsed by it.
> > >
> > >Visit us on the web at http://www.utilpart.com
> > >*****************************************************************
>
> *****************************************************************
> This e-mail and any files transmitted with it are confidential and are
> intended solely for the use of the individual or entity to whom it is
> addressed. If you have received this transmission in error, please notify
> the sender immediately and destroy any hard copies you may have printed and
> remove all copies of the e-mail from your hard drive. Opinions, conclusions
> and other information in this message that do not relate to the official
> business of Utility Partners, Inc shall be understood as neither given nor
> endorsed by it.
>
> Visit us on the web at http://www.utilpart.com
> *****************************************************************
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 13:30:28 EDT