On Thu, 2004-06-17 at 11:26, Eben King wrote:
> I had a real SCSI CD burner. It would show up fine when I ran "cdrecord
> -scanbus", as would the other SCSI device. It died, so I got an IDE DVD
> burner, on which I use ide-scsi, via these lines in modules.conf:
>
> below sg ide-scsi
> below ide-scsi ide-cd
>
> It is /dev/hdc, as many documents assume. The directions I found at
> http://krnlpanic.com/tutorials/ide-scsi.php say to add
>
> alias scsi_hostadapter ide-scsi
>
> But I already have a genuine SCSI card (aic7xxx). I don't want to lose
> support for it and its devices.
>
> Also, before I changed hardware, "cdrecord -scanbus" would show everything
> on the SCSI bus. Now, it shows the DVD drive as the only item (0,0,0) on
> the only bus (scsibus0). How would I get it to show three buses --
> aic7xxx, ide-scsi, and usb-storage?
Regarding the SCSI, what does dmesg show? Does it show something like
this for the adapter:
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 29160 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Along with attached devices:
(scsi0:A:1): 10.000MB/s transfers (10.000MHz, offset 15)
Vendor: ARCHIVE Model: Python 04106-XXX Rev: 743B
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: QUANTUM Model: ATLAS10K2-TY092L Rev: DDD6
Type: Direct-Access ANSI SCSI revision: 03
Vendor: QUANTUM Model: ATLAS10K2-TY092L Rev: DDD6
Type: Direct-Access ANSI SCSI revision: 03
The Logan
-- 16:50:01 up 117 days, 10:12, 3 users, load average: 0.30, 0.62, 0.84 I've seen these high-tech Japanese toilets before on TV. -- Matt Moen, SLUG List ICQ: 72101412 AIM/MSN/Yahoo/Jabber: logantheclever Registered Linux User: 277727
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 17:51:07 EDT