Re: [SLUG] SCSI vs "cdrecord -scanbus"

From: Eben King (eben1@tampabay.rr.com)
Date: Thu Jun 17 2004 - 17:34:29 EDT

On Thu, 17 Jun 2004, Logan Tygart wrote:

> On Thu, 2004-06-17 at 11:26, Eben King wrote:
> > Also, before I changed hardware, "cdrecord -scanbus" would show everything
> > on the SCSI bus. Now, it shows the DVD drive as the only item (0,0,0) on
> > the only bus (scsibus0). How would I get it to show three buses --
> > aic7xxx, ide-scsi, and usb-storage?
>
> Regarding the SCSI, what does dmesg show? Does it show something like
> this for the adapter:
>
> scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
> <Adaptec 29160 Ultra160 SCSI adapter>
> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
> Along with attached devices:
>
> (scsi0:A:1): 10.000MB/s transfers (10.000MHz, offset 15)
> Vendor: ARCHIVE Model: Python 04106-XXX Rev: 743B
> Type: Sequential-Access ANSI SCSI revision: 02
> Vendor: QUANTUM Model: ATLAS10K2-TY092L Rev: DDD6
> Type: Direct-Access ANSI SCSI revision: 03
> Vendor: QUANTUM Model: ATLAS10K2-TY092L Rev: DDD6
> Type: Direct-Access ANSI SCSI revision: 03

Yes, I see this:

scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec 2940 Ultra SCSI adapter>
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

(scsi1:A:4): 10.000MB/s transfers (10.000MHz, offset 15)
  Vendor: Seagate Model: STT20000N Rev: 6A51
  Type: Sequential-Access ANSI SCSI revision: 02
scsi : 1 host left. 

-- 
-eben    ebQenW1@EtaRmpTabYayU.rIr.OcoPm    home.tampabay.rr.com/hactar

      rm -f /bin/laden 

-----------------------------------------------------------------------
This list is provided as an unmoderated internet service by Networked
Knowledge Systems (NKS).  Views and opinions expressed in messages
posted are those of the author and do not necessarily reflect the
official policy or position of NKS or any of its employees.

This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 17:51:59 EDT