I think that is Sveasoft. Really cool if you have one of the supported
products.
http://www.sveasoft.com/modules/phpBB2/
Thanks,
Steve
-----Original Message-----
From: slug@nks.net [mailto:slug@nks.net] On Behalf Of James Miller
Sent: Wednesday, June 16, 2004 8:28 PM
To: slug@nks.net
Subject: Re: [SLUG] Fw: Linksys WRT54G -
If you use the "third party" update (I think it's called Samidi), you'll
find it very nice. Seriously upscales the options, even lets you boost the
power...
----- Original Message -----
From: "Robert Foxworth" <rfoxwor1@tampabay.rr.com>
To: <slug@nks.net>
Sent: Friday, June 18, 2004 5:49 AM
Subject: [SLUG] Fw: Linksys WRT54G -
> As long as we are in posting mode, I recall
> overhearing some chat about the Linksys WRT54G
> while standing in the hallway at the last Tampa mtg.
>
> I do not have that device, but there recently was some
> talk on bugtraq about the default device having a vulnerability
> allowing access to the web config interface from the outside net, and
> a backdoor admin login with a default undocumented password.
>
> I am forwarding the latest posting I saw on it. 9 June 2004. I believe
> the links point to current firmware upgrades. This can be a starting
> point for you, if you have this device.
>
> Repeat - I do not have this device and can't offer more help.
>
> Just delete this msg if you don't have this device, but it sounded
> like some of you do.
>
> HTH Bob Foxworth
> ------
>
> >Sent: Wednesday, June 09, 2004 15:54
> >Subject: RE: Linksys WRT54G - Advice for european users
> .
>
> > The readme on the v2.07 US firmware (for v2 hardware) carries no
> > such warning... Apparently they pay more attention to things like
> > this in Europe! :)
> >
> > Actually, since my initial problems a few months back - just last
> > week
> in
> > fact - they released another version of 2.07 for the v1.1
> > hardware...
> The
> > readme in _that_ zip file mentions that you must be running 1.09.1
> > on
> v1.0 /
> > v1.1 hardware or the install won't work. But, if you get the other
> 2.07
> > firmware - the one that has been available for some time now - all
> > you
> get
> > is the claim that it supports all versions of the WAP54G hardware,
> > and
> no
> > other warnings:
> >
> > Version 2.07, April 28, 2004
> > - Adds Linksys Wireless Guard support
> > Note:WPA does not work in Wireless Bridge/Repeater mode in this
> release
> >
> > Version 2.06, December 16, 2003 (ver.2 initial release)
> > - Updated User Interface format and layout
> > - Updated wireless driver to support all versions of WAP54G hardware
> > - Adds AP Client Mode
> > - Adds Wireless Repeater Mode for WAP54G and WRT54G (requires fw
> 2.02.2 or
> > above)
> > Note:WPA does not work in Wireless Bridge/Repeater mode in this
> > releas
> e
> >
> > http://www.linksys.com/download/vertxt/wap54gv2_fw_ver207.txt
> >
> >
> > But thank you to everyone who pointed out this document -
> > http://www.linksys.com/download/vertxt/WAP54GupgradeprocedureV2.doc
> > -
> It
> > definitely was information that helped...
> >
> >
> (snip)>
> >
> > Hejsa Ethan
> >
> > 7. juni 2004, 18:56:18, you wrote:
> >
> > CEMW> Another bit of warning about linksys and their inability to
> > CEMW> get the firmware release vs. hardware version worked out
> > CEMW> correctly. If you install the latest WAP54G firmware update
> > CEMW> for the v2 hardware on v1 or v1.1 hardware (which the readme
> > CEMW> says is supported)... Expect the ethernet port to disable
> > CEMW> itself (due
> to
> > CEMW> the order in which the interfaces are initialized on the
> > CEMW> device) after you power cycle it...
> >
> > From the readme.txt
> > "
> > Note: If you try and upgrade an older unit to firmware 2.07 without
> > upgrading the firmware to 1.09.1 prior to upgrade, you may damage
> > the
> Access
> > Point."
> >
> > Checkout these links
> >
> > http://www.linksys.com/international/firmware.asp?intfwid=9&coid=48
> >
> > This document explains how to upgrade your WAP54G to firmware
> > version 2.07.01 The procedure applies to V1.0 and V1.1 hardwares.
> > http://www.linksys.com/download/vertxt/WAP54GupgradeprocedureV2.doc
> >
> >
> > --
> > Best regards/Venlig hilsen
> > Richard Bjerregaard
>
>
>
> ----------------------------------------------------------------------
> -
> This list is provided as an unmoderated internet service by Networked
> Knowledge Systems (NKS). Views and opinions expressed in messages
> posted are those of the author and do not necessarily reflect the
> official policy or position of NKS or any of its employees.
>
--- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.699 / Virus Database: 456 - Release Date: 6/4/2004----------------------------------------------------------------------- This list is provided as an unmoderated internet service by Networked Knowledge Systems (NKS). Views and opinions expressed in messages posted are those of the author and do not necessarily reflect the official policy or position of NKS or any of its employees.
----------------------------------------------------------------------- This list is provided as an unmoderated internet service by Networked Knowledge Systems (NKS). Views and opinions expressed in messages posted are those of the author and do not necessarily reflect the official policy or position of NKS or any of its employees.
This archive was generated by hypermail 2.1.3 : Fri Aug 01 2014 - 17:51:52 EDT